The April 2018 Edition of The Printed Circuit has been released. Thanks to Dave Davis WA4WES for you work in preparing this for the club.
2018 Field Day
44th Annual Tallahassee Half and Full Marathon
2018 Election Results
TARS Officer Elections
Officer elections for 2018 will be held at our next meeting, Thursday, November 2, 2017 at 7PM. The ballot is as follows:
President: Chief, KA5USN, and John, KM4FAM
Vice President: Dave, W4SKG
Treasurer: Gerry, WA6POZ
Secretary: Tom, K4TB
Member at Large: Bob K9HVW
K4TLH Special Event
K4TLH is operating a Special Event Station on October 31, 2017. HF frequencies 14.331, 7.231, 3.931 will be used. Special Event QSL Card available upon request. For additional information, please email firstname.lastname@example.org.
ARRL Field Day 2017 Photos
Updated Bylaws as of November 3, 2016
Updated Membership Listing
We have updated the Membership Roster as of May 10, 2017.
Announcing the 20th Anniversary of the Florida QSO Party!
We’re having a party, and you’re invited! The Florida QSO Party is this weekend, April 29 & April 30. Since the re-introduction of the Florida QSO Party to the contest scene in 1998, the Florida QSO Party has become one of the fastest growing and most popular State QSO Parties around today. Sponsored by the Florida Contest Group, there will be 20 special 1×1 calls spelling out FLORIDA SUN for a special award.
It’s Fun! It’s Easy!
Be sure to enter, even if it’s just for a short while. It will be fun. It will be easy. Even if you have never entered a contest before, because it is not necessarily a contest – it is an event – it is a PARTY! You don’t have to work DX because the object is to work as many states as possible… and have fun.
The event is both Saturday and Sunday, so you can operate during the day either day or Saturday evening and choose your band. You can operate on 40, 20, 15 or 10 meters. There are two time periods: Noon to 10 pm Saturday and 8 am to 6 pm Sunday. 20, 15 and 10 meters should be open during the daylight hours and after dark there is 40 and maybe 20.
Does it sound interesting, but you have never entered a contest-like event? Never fear. It is easy. Read on. I’ll guide you through it, step by step.
The first thing you have to do is make a contact. (I will talk SSB here although the ideas are similar for CW.) There are two ways of making contacts: “running” and “search and pounce.” Running is simply sitting on an open frequency and calling CQ. It is the most efficient because the other stations come to you. Search and pounce (S&P) is just searching for someone else calling CQ. When you find them, just give your callsign once, using standard phonetics, and listen to see if they come back to you. If not, try again.
This is the Florida QSO Party. Everyone is going to want to work YOU. You can’t effectively use S&P when you are the fox and they are the hounds. They will be using the S&P technique that I just described. You almost have to RUN. So let’s see how that is done. Don’t fear… It is also easy. Matter of fact, you just sit there and wait for them to come to you. (You can still do a little S&P if you want other Florida contacts.)
First you need to find an open frequency. (This sometimes is the hardest part). You want as many contacts as possible, so even if you are an Extra Class, find a frequency in the General Class band so that you aren’t excluding anyone. For the Florida QSO Party, I recommend 20 or 15 meters. 10 meters is also a possibility, but lately it is not open very often and your contacts will be mostly in the West. If it is in the evening on Saturday, you can use either 40 or possibly 20. On 20 SSB (and above), it is standard to choose a frequency ending in a multiple of .25; e.g., 14284.00, 14284.25, 14284.50, 14284.75, etc. You may have to search to find an open frequency with no one nearby. Once you do, say, “Is this frequency in use?” and pause. When you find an open frequency, hold on to it. Don’t pause for too long in between CQs or QSOs. Any longer than 30 seconds and you are likely to lose the frequency in a busy contest.
For the Florida QSO Party, you simply call, “CQ Florida QSO Party” a couple of times and give your callsign phonetically. Pause a little, then call again until someone calls you. If things get hot, you may only have to say it once and give your call twice before waiting. Sometimes, it is good practice to add a CQ at the end for someone who is just tuning by: “CQ Florida QSO Party. This is Kilo 4 Sierra Bravo Zulu, Kilo 4 Sierra Bravo Zulu calling CQ the Florida QSO Party.” Some people replace the last CQ with “Q-R-Zed” (QRZ = who is calling me?).
When you hear someone give their callsign on your frequency, simply give them the contest exchange: signal report and your county. So, if you live in Leon County, you would say, “Kilo Delta 7 Hotel Tango Whiskey, you are Five-Nine Leon.” (Everyone is 59, even if you can barely hear them and it took six tries to get their callsign right). The counties have three character abbreviations: Leon – LEO, Jefferson – JEF, Gadsden – GAD, Wakulla – WAK for use in their contest loggers. (Check http://www.floridaqsoparty.
They should come back with a signal report and their state.
When they have finished giving their exchange, you need to say thank you or QSL and move on to the next contact. This is usually done by using QRZ, pronounced “Q-R-Zed.” So you might say, “Thank you for Arizona. This is Kilo 4 Sierra Bravo Zulu, Q-R-Zed the Florida QSO Party.” Hopefully, you will have someone else already waiting to work you. This is called a pile-up. If you don’t, then call CQ.
Most contests have a scoring algorithm that involves “multipliers.” Yes, you want a lot of contacts, but you also want a lot of multipliers to multiply those contacts by. In the case of the Florida QSO Party, the multipliers are states. You want to get as many states as possible because 400 Qs X 15 states = 6000 points, but only 200 Qs X 40 states = 8000 points. In some contests, you can get two multipliers by working the same station on different bands, so always read the rules for the contest that you are participating in.
Contest Logging Software
Your regular electronic logbook or digital decoder may have a contest feature. Most that do have limited features, but may be sufficient for your use.
The top two contest logging packages are N1MM and the N3FJP. N1MM is the most frequently used, mostly because it supports RTTY by running MMTTY internally. Also, it is free, while the others require a fee. N3FJP has more features. Other popular contest logging software include WriteLog and Win-Test. All contest logging software focuses on fast entry of contacts. They all produce the Cabrillo logs required for log submission as well as ADIF files that can be imported into your regular electronic log.
N1MM Logger http://n1mm.hamdocs.com/tiki-
N3FJP Logs http://www.n3fjp.com/
WriteLog for Windows https://writelog.com/
Once the contest is over, use your contest logging software to produce a Cabrillo log and email it to the address given in the contest rules. You should get an email within minutes from the big contests confirming the receipt of your log or telling you about any errors you may have made. A contest robot reviews your log immediately. You may resubmit your log as often as necessary to correct any errors.
Then sit back and wait. These big contests take months before they publish the results. Who knows, maybe you will win a certificate for the most contacts for your county.
Check out the QSO Party’s web page at https://.org/ for more information and details on submitting your log. If you have more questions, please contact Stan, K4SBZ, at email@example.com.
HAVE FUN! JOIN IN!